MASS 7.3-25 - en to en translation catalogue (72 entries)

en: %s does not have both 'qr' and 'y' components
en: %s does not have both ‘qr’ and ‘y’ components

en: 'Sigma' is not positive definite
en: ‘Sigma’ is not positive definite

en: 'W' is not positive definite
en: ‘W’ is not positive definite

en: 'X' must be a numeric or complex matrix
en: ‘X’ must be a numeric or complex matrix

en: 'anova' is not available for PQL fits
en: ‘anova’ is not available for PQL fits

en: 'breaks' do not cover the data
en: ‘breaks’ do not cover the data

en: 'breaks' must be strictly increasing
en: ‘breaks’ must be strictly increasing

en: 'c' must be at least 1.548 and has been ignored
en: ‘c’ must be at least 1.548 and has been ignored

en: 'center' is not the right length
en: ‘center’ is not the right length

en: 'coef' must define a contrast, i.e., sum to 0
en: ‘coef’ must define a contrast, i.e., sum to 0

en: 'coef' must have same length as 'contrast.obj'
en: ‘coef’ must have same length as ‘contrast.obj’

en: 'data' has no 'terms' attribute
en: ‘data’ has no ‘terms’ attribute

en: 'densfun' must be supplied as a function or name
en: ‘densfun’ must be supplied as a function or name

en: 'dropterm' not implemented for "mlm" fits
en: ‘dropterm’ not implemented for "mlm" fits

en: 'family' not recognized
en: ‘family’ not recognized

en: 'h' must be strictly positive
en: ‘h’ must be strictly positive

en: 'init' method is unknown
en: ‘init’ method is unknown

en: 'lqs' failed: all the samples were singular
en: ‘lqs’ failed: all the samples were singular

en: 'method' is unknown
en: ‘method’ is unknown

en: 'nbins' must result in a positive integer
en: ‘nbins’ must result in a positive integer

en: 'newdata' is not of the right length
en: ‘newdata’ is not of the right length

en: 'nu' must exceed 2
en: ‘nu’ must exceed 2

en: 'object' has no 'call' component.  Updating not possible
en: ‘object’ has no ‘call’ component.  Updating not possible

en: 'prior' is of incorrect length
en: ‘prior’ is of incorrect length

en: 'ps' must be at least 'p'
en: ‘ps’ must be at least ‘p’

en: 'quantile' must be at least %d
en: ‘quantile’ must be at least %d

en: 'quantile' must be at most %d
en: ‘quantile’ must be at most %d

en: 'rlm' failed to converge in %d steps
en: ‘rlm’ failed to converge in %d steps

en: 'start' is not of the correct length
en: ‘start’ is not of the correct length

en: 'start' must be a named list
en: ‘start’ must be a named list

en: 'start' specifies names which are not arguments to 'densfun'
en: ‘start’ specifies names which are not arguments to ‘densfun’

en: 'theta' must be given
en: ‘theta’ must be given

en: 'theta' must be specified
en: ‘theta’ must be specified

en: 'uin' is too large to fit plot in
en: ‘uin’ is too large to fit plot in

en: 'use.start' cannot be used with R's version of 'glm'
en: ‘use.start’ cannot be used with R's version of ‘glm’

en: 'x' and 'y' must have the same number of rows
en: ‘x’ and ‘y’ must have the same number of rows

en: 'x' contains missing or infinite values
en: ‘x’ contains missing or infinite values

en: 'x' has length zero
en: ‘x’ has length zero

en: 'x' is not a matrix
en: ‘x’ is not a matrix

en: 'x' is probably collinear
en: ‘x’ is probably collinear

en: 'x' is singular: singular fits are not implemented in 'rlm'
en: ‘x’ is singular: singular fits are not implemented in ‘rlm’

en: 'x' must be a non-empty numeric vector
en: ‘x’ must be a non-empty numeric vector

en: 'y' must be a matrix
en: ‘y’ must be a matrix

en: AIC is -infinity for this model, so 'stepAIC' cannot proceed
en: AIC is -infinity for this model, so ‘stepAIC’ cannot proceed

en: AIC is not defined for this model, so 'stepAIC' cannot proceed
en: AIC is not defined for this model, so ‘stepAIC’ cannot proceed

en: F test assumes 'quasi%s' family
en: F test assumes ‘quasi%s’ family

en: Infs not allowed in 'd'
en: Infs not allowed in ‘d’

en: Initial value for 'theta': %f
en: Initial value for ‘theta’: %f

en: an initial configuration must be supplied if there are NAs in 'd'
en: an initial configuration must be supplied if there are NAs in ‘d’

en: an initial configuration must be supplied with NA/Infs in 'd'
en: an initial configuration must be supplied with NA/Infs in ‘d’

en: at least 3 distinct 'x' values are needed
en: at least 3 distinct ‘x’ values are needed

en: cannot have leave-one-out CV with 'newdata'
en: cannot have leave-one-out CV with ‘newdata’

en: columns of 'contrast.obj' must define a contrast (sum to zero)
en: columns of ‘contrast.obj’ must define a contrast (sum to zero)

en: distances must be result of 'dist' or a square matrix
en: distances must be result of ‘dist’ or a square matrix

en: each element of '%s' must be logical
en: each element of ‘%s’ must be logical

en: factors in 'newdata' do not match those for 'object'
en: factors in ‘newdata’ do not match those for ‘object’

en: infinite, NA or NaN values in 'x'
en: infinite, NA or NaN values in ‘x’

en: invalid 'prior'
en: invalid ‘prior’

en: invalid 'test.vec'
en: invalid ‘test.vec’

en: iteration limit reached near 'x = %f'
en: iteration limit reached near ‘x = %f’

en: length of 'weights' must equal number of observations
en: length of ‘weights’ must equal number of observations

en: length of 'wt' must equal number of observations
en: length of ‘wt’ must equal number of observations

en: missing or infinite values in 'x'
en: missing or infinite values in ‘x’

en: negative 'weights' value
en: negative ‘weights’ value

en: no 'addterm' method implemented for "mlm" models
en: no ‘addterm’ method implemented for "mlm" models

en: only 'REML = FALSE' is implemented
en: only ‘REML = FALSE’ is implemented

en: only finite values are allowed in 'lims'
en: only finite values are allowed in ‘lims’

en: package 'nlme' is essential
en: package ‘nlme’ is essential

en: some group is too small for 'qda'
en: some group is too small for ‘qda’

en: tests made without re-estimating 'theta'
en: tests made without re-estimating ‘theta’

en: uneven breaks with 'prob = FALSE' will give a misleading plot
en: uneven breaks with ‘prob = FALSE’ will give a misleading plot

en: variable names in 'newdata' do not match those in 'object'
en: variable names in ‘newdata’ do not match those in ‘object’
